Heli-Max Novus CP 2.4GHz Nano Sized RTF Helicopter

Posted: May 13, 2010 in Toy's

This is the electric powered, ready to fly, nano size
Novus Collective Pitch Helicopter from Heli-Max.
FEATURES: Capable of a wide range of fully aerobatic maneuvers including
flying inverted
Rotor Head: Collective pitch type with Bell-Hiller mixing and eCCPM
control system for high performance usually found on much larger
Tail Rotor: Bevel gear drive, supported with ball bearings
Radio: Heli-Max 2.4GHz 6-channel with three digital servos for high-
speed stability and precise centering, servos weigh only 3g each
Landing Gear: Music wire frame type
Main Blades:
Battery: 3.7V, 400mAh LiPo, very light and compact
Battery Charger: AC wall type

INCLUDES: Novus Collective Pitch Helicopter, with radio system, battery,
charger and instruction manual

REQUIRES: AA Batteries: 8 for transmitter

SPECS:    Rotor Diameter: 12″ (305mm)
Length: 10.7″ (272mm)
Width: 2″ (50mm)
Height: 3.74″ (95mm)
Weight: 2.4 oz (68.4g) with supplied battery

COMMENTS: The Heli-Max Novus series includes;
Novus CX, Beginner Friendly w/Dual Counter Rotating Blades; HMXE0803
Novus FP, Fixed Pitch Rotor, Gear Driven Tail Rotor; HMXE0802
Novus CP, Collective Pitch, Fully Aerobatic; HMXE0804

Only use the included charger with the included battery or
replacement part (GPMP0408).
Do not attempt to use this charger with NiCd or NiMH battery packs.
Never charge in excess of 4.20V per cell.
If the battery should become damaged, discard the battery. Do not
attempt to use a damaged battery.
Do not leave the charger unattended while charging. Disconnect the
battery and remove input power from the charger immediately if
either becomes hot! However, it is normal for the charger to get
Disconnect the battery from the charger and carefully move the
battery to a fireproof location if the battery begins to swell or
Never charge at currents greater than 1C.
Always charge in a fireproof location.
Never trickle charge.
Never allow the battery temperature to exceed 150° F (65° C).
Never disassemble or modify pack wiring in any way or puncture cells.
Never discharge below 2.75V per cell.
Do not allow water, moisture or foreign objects into the charger.
Do not block the air intake holes, which could cause the charger to
Do not place the charger or any battery on a flammable surface or
near a combustible material while in use.
Do not charge on a carpet, cluttered workbench, paper, plastic,
vinyl, leather, wood or inside an R/C model.
Never charge inside a full-sized vehicle.
Always disconnect the battery from the charger and the power supply
from the charger when not in use.
Do not attempt to charge a battery if it is swollen or hot.


Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s